Edelbrock 2105 - Performer Manifold, Ford FE 332-428

€549.75 *

Prices incl. VAT plus shipping costs

Delivery time approx. 18-24 working days

color:

  • EDL-2105
Edelbrock Part # 2105 Performer 390 intake manifold is designed for street... more
Edelbrock 2105 - Performer Manifold, Ford FE 332-428

Edelbrock Part # 2105 Performer 390 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.

  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
Car/Engine: Ford FE
Engine Notes: 332-352-360-390-406-410-427-428 cui
Color/Finish: Satin, Polished
RPM Range: Idle-5500
Serie: Performer
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Related links
Documentation... more
Installation Notes
    • Recommended intake gasket: Edelbrock # 7224 or Fel-Pro # 1247
    • Manifold height: A-4.35", B-5.50" (same as stock)
    • Carburetor pad height: 4.92"
    • Carburetor recommendations: Edelbrock Thunder Series AVS or Performer Series Carb, 600-800cfm. For automatic transmissions use # 1483 or # 1844.
    • Camshaft Recommendations: Performer-Plus #2106
    • Port exit dimensions: 1.06" x 1.75"
    • Will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 & 391 c.i.d. Ford truck V8s.
    • Due to the design of Performer manifolds, the throttle and kick-down bracket on some vehicles may require modification to fit.
    • Due to the possible lack of hood clearance, you may not be able to use the OEM water heater space block between the intake manifold and carburetor.
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Read, write and discuss reviews... more
Customer review for "Performer Manifold, Ford FE 332-428"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed