Edelbrock 2114 - Performer Manifold, Chevrolet 90° V6, 85-up Vortec

€521.75 *

Prices incl. VAT plus shipping costs*

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

  • EDL-2114
Edelbrock Part # 2114 Performer Vortec V6 intake manifold is based on the powerful Edelbrock... more
Edelbrock 2114 - Performer Manifold, Chevrolet 90° V6, 85-up Vortec

Edelbrock Part # 2114 Performer Vortec V6 intake manifold is based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine swap market utilizing 1985 and later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with Vortec heads. With this manifold, rodders can take advantage of the higher flow available with the Vortec head design. This Performer Vortec intake manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. Designed for use with Edelbrock Thunder Series AVS or Performer Series 500 cfm carbs, it accepts late model water neck, alternator, HEI and air conditioning.

  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
  • Designed for engine swaps using GM Vortec heads
  • Accepts external water bypass
  • Works on both Vortec and 1995 and earlier blocks
  • Accepts late-model water neck, alternators, HEI ignition and A/C
Car/Engine: Chevrolet V6/L6
Engine Notes: 200-229-262 cui -1985 and later with Vortec Heads
Color/Finish: Satin
RPM Range: Idle-5500
Serie: Performer
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Related links
Documentation... more
Installation Notes
    • Recommended intake gasket: GM 89017866
    • Manifold height: A-3.50", B-4.18"
    • Carburetor pad height: 3.84"
    • Carburetor recommendations: Edelbrock AVS2 Series or Performer Series 500cfm
    • Camshaft Recommendations: Performer Plus #2112
    • Port exit dimensions: port exit is 2.05" tall with slanted sidewalls
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Read, write and discuss reviews... more
Customer review for "Performer Manifold, Chevrolet 90° V6, 85-up Vortec"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Variants available

Variants available

Variants available

Viewed