Edelbrock 2604 - Performer Air-Gap Manifold, Chevrolet Small Block, 87-95

€536.00 *

Prices incl. VAT plus shipping costs*

Delivery time approx. 6-10 Workdays

  • EDL-2604
Edelbrock Part # 2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads... more
Edelbrock 2604 - Performer Air-Gap Manifold, Chevrolet Small Block, 87-95

Edelbrock Part # 2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open-air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance make this an ideal choice for street rods and street machines. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.

  • Based on Performer series with a unique air gap
  • Air gap causes cool and dense mixture more power
  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise Intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
  • Fits both spread-bore and square-bore carburetors
  • Ideal for street rods and street machines
Car/Engine: Chevrolet Small Block
Engine Notes: 262-400 cui - 1987-95 Cast Iron Heads
Color/Finish: Satin
RPM Range: Idle-5500
Serie: Performer Air-Gap
Emission: Without EGR
Flange: Square Bore, Spread Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Related links
Documentation... more
Installation Notes
    • Manifold height: A-3.72", B-4.92" (.27" taller than # 2101)
    • Carburetor pad height: 4.32"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm. Use Bracket # 8031 or # 8036 for 1972-78.
    • Camshaft Recommendations: Performer Plus #2102 and #2103
    • Port exit dimensions: 1.14" x 1.88"
    • Recommended intake gasket: GM # 10163409
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
    • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
    • DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
    • Will not fir under stock Corvette hood
    • Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
    • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Read, write and discuss reviews... more
Customer review for "Performer Air-Gap Manifold, Chevrolet Small Block, 87-95"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Variants available

Variants available

Variants available

Viewed