Edelbrock 2703 - Performer EPS Manifold, Chevrolet Small Block, 55-86, with Oil Fill Tube

€332.50 *

Prices incl. VAT plus shipping costs

In Stock - Ready to ship,
Delivery time appr. 1-3 workdays

color:

  • EDL-2703
Edelbrock Part # 2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400... more
Edelbrock 2703 - Performer EPS Manifold, Chevrolet Small Block, 55-86, with Oil Fill Tube

Edelbrock Part # 2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This intake manifold combines a modern runner design with a front-mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer intake manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. In addition, the Edelbrock Performer EPS #2703 dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. Includes Oil Fill Tube (not installed) and matching push-in breather cap. 

  • Front-mounted oil fill tube
  • Runner design tuned for peak torque
  • For vintage look of classic valve cover with no breathers
  • Includes oil fill tube and matching push-in breather
Car/Engine: Chevrolet Small Block
Engine Notes: 262-400 cui - 1986 and earlier
Color/Finish: Satin, Black, Endurashine, Polished
RPM Range: Idle-5500
Serie: Performer EPS
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Related links
Installation Notes
    • Manifold ht: A-3.74", B-4.80"
    • Carburetor pad height: 4.27"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm
    • Camshaft Recommendations: #2102, #2103, #2208, #2209
    • Port exit dimensions: 1.15" x 1.87".
    • Recommended intake gasket: Edelbrock # 7201.
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
    • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
    • DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
    • Will not fit under stock Corvette hood.
    • Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
    • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Read, write and discuss reviews... more
Customer review for "Performer EPS Manifold, Chevrolet Small Block, 55-86, with Oil Fill Tube"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed