Edelbrock 71196 - Performer RPM Manifold, Chevrolet LS3 Carbureted, with TCM

Performer RPM Manifold, Chevrolet LS3 Carbureted, with TCM
€953.75 *

Prices incl. VAT plus shipping costs

Delivery time approx. 18-24 working days

  • EDL-71196
Edelbrock Part # 71196 Performer RPM LS3 intake manifold is designed for Gen IV engines with... more
Edelbrock 71196 - Performer RPM Manifold, Chevrolet LS3 Carbureted, with TCM

Edelbrock Part # 71196 Performer RPM LS3 intake manifold is designed for Gen IV engines with LS3, L92 and L76 rectangular port cylinder heads. The Performer RPM LS3 manifold is ideal for anybody looking to build a carbureted LS3 or LS2 engine with an operating range between 1,500 - 6,500 rpm. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve. It features a high-rise dual-plane design combined with a plenum that has been optimized for square-bore carburetors. This manifold includes an MSD Ignition Timing Control Module #6012, including passages for routing the coil wire harness, for a clean look. A special throttle and trans bracket that works with 700R-4, 200-4R and Turbo 350 transmissions is also included, making this an easy retro-fit into any muscle car, street rod or marine application.

  • Converts LS3 gen IV engine to carburetor
  • Also fits L92 and L76 rectangular port cylinder heads engines
  • Includes wiring harness and timing control module
  • Contains 6 timing curves and works with OE sensors
  • For 1500 to 6500 RPM street performance
  • Includes brackets for 700R-4, 200R-4, Turbo 350
  • Excellent for engine retro-fit applications
  • Engine swaps
Car/Engine: Chevrolet LS
Engine Notes: LS3, L92 and L76
Color/Finish: Satin
RPM Range: 1500-6500
Serie: Performer RPM
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Performance
Carburator Setup: Single-Carburator
Related links
Documentation... more
Installation Notes
    • Uses LS3/ L92/L76 style individual port o-ring seals Edelbrock #7395 or GM PN19256623
    • Manifold height: A-4.66", B-5.56"
    • Carburetor pad height: 5.11"; CA-3°. Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm.
    • Port exit dimensions: 1.16" x 2.40"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Read, write and discuss reviews... more
Customer review for "Performer RPM Manifold, Chevrolet LS3 Carbureted, with TCM"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed