Edelbrock 7561 - RPM Air-Gap 2-O Manifold, Chevrolet Big Block, Oval Port

€429.25 *

Prices incl. VAT plus shipping costs

In Stock - Ready to ship,
Delivery time appr. 1-3 workdays

color:

  • EDL-7561
Edelbrock Part # 7561 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d.... more
Edelbrock 7561 - RPM Air-Gap 2-O Manifold, Chevrolet Big Block, Oval Port

Edelbrock Part # 7561 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust heated chokes and no exhaust crossover.

  • Based on performer RPM-series with unique air gap
  • Air gap cooler and denser mixture for more power
  • Designed for 1500 to 6500 RPM street-driven power
  • Dual-plane high-rise intake with 180-degree firing order
  • Produces incredible top-end horsepower
  • Retains good throttle response and acceleration
  • Larger plenum and runners maximize other upgrades
  • Edelbrock total power package maximizes gains
Car/Engine: Chevrolet Big Block
Engine Notes: 396-454 cui - Oval Ports
Color/Finish: Satin, Black, Endurashine, Polished
RPM Range: 1500-6500
Serie: RPM Air-Gap
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Performance
Carburator Setup: Single-Carburator
Related links
Installation Notes
    • Recommended intake gasket: Edelbrock # 7203
    • Manifold height: A-4.45", B-6.0"
    • Carburetor pad height: 5.22"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket # 8031 for 1972-78.
    • Port exit dimensions: 1.60" x 1.94"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Read, write and discuss reviews... more
Customer review for "RPM Air-Gap 2-O Manifold, Chevrolet Big Block, Oval Port"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed