1 From 9
No results were found for the filter!
Performer Manifold, Rover/Buick 215 V8 Performer Manifold, Rover/Buick 215 V8
(1 )
Designed for Rover 3500cc V8's (1968 & later) and 1961-63 Buick and Oldsmobile aluminum 215 V8's. Manifold not equipped with EGR. Will not work with OEM carburetors (except Carter AVS). ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm. Installation Notes: Recommended intake gasket: Fel-Pro #MS96002. Manifold height: A-5.00",...
Edelbrock   Partnumber: 2198
€401.00
incl. vat
RPM Air Gap Manifold, Ford 260/289/302 RPM Air Gap Manifold, Ford 260/289/302
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake. Race winning technology. Based on Performer RPM-Series with Unique Air Gap Air Gap Cooler and Denser Mixture for More Power Designed for 1500 to 6500 RPM Street-Driven Power Dual-Plane High-Rise...
Edelbrock   Partnumber: 7521
From
€459.25
incl. vat
Flathead Slingshot Intake Manifold, Ford Flathead Flathead Slingshot Intake Manifold, Ford Flathead
Now you can get that unique vintage look with a durable black powder coated finish. This is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless steel acorn nuts for mounting the two halves. Match with our block letter heads for a timeless look. Will fit Ford and Mercury engines...
Edelbrock   Partnumber: 1103
From
€621.25
incl. vat
Ford Flathead 4-barrel Manifold 1949-1953 Ford Flathead 4-barrel Manifold 1949-1953
This manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series AVS 500 cfm on the 1949-1953 Ford Flathead engine. This is a reproduction of the vintage Edelbrock #452 two-piece manifold with a new carb adapter flange. Carb adapter flange also available separately, #1106. Reproduction Of The Vintage 452 Two-Piece Manifold For Use On...
Edelbrock   Partnumber: 1107
From
€592.00
incl. vat
Flathead Triple Deuce Intake Manifold, Ford Flathead Flathead Triple Deuce Intake Manifold, Ford Flathead
These reproductions of the vintage Edelbrock manifold #SU 359 and #SU 349 allow the use of three 2-barrel carburetors on 1938-1948 and 1949-1953 Ford Flathead engines. #1109 features front road draft and 1-3/8 diameter oil fill bosses and a raised fuel pump boss. They accept #1151 and #1152 Edelbrock 94 3-bolt, Stromberg 3-bolt (97 type), Holley 3-bolt and Demon 98...
Edelbrock   Partnumber: 1108
From
€381.00
incl. vat
Flathead Triple Deuce Intake Manifold, Ford Flathead Flathead Triple Deuce Intake Manifold, Ford Flathead
These reproductions of the vintage Edelbrock manifold #SU 359 and #SU 349 allow the use of three 2-barrel carburetors on 1938-1948 and 1949-1953 Ford Flathead engines. #1109 features front road draft and 1-3/8 diameter oil fill bosses and a raised fuel pump boss. They accept #1151 and #1152 Edelbrock 94 3-bolt, Stromberg 3-bolt (97 type), Holley 3-bolt and Demon 98...
Edelbrock   Partnumber: 1109
From
€475.50
incl. vat
Performer Manifold, Chevrolet Small Block Performer Manifold, Chevrolet Small Block
Designed for street 1955-86 small-block Chevys. Performers accept late-model choke, water neck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. For Idle to 5500 RPM Street-Driven Performance Dual-Plane Low-Rise Intake w/180 Deg Firing Order...
Edelbrock   Partnumber: 2101
From
€255.75
incl. vat
Performer Manifold, Chevrolet SBC, 87-95 cast Iron Heads Performer Manifold, Chevrolet SBC, 87-95 cast Iron Heads
Designed for street 262-400 c.i.d. Chevy V8s that have heads with canted center bolt holes. Both accept late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers. #2104 accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads. For Idle to 5500 RPM Street-Driven Performance...
Edelbrock   Partnumber: 2104
From
€333.25
incl. vat
Performer Manifold, Ford FE 332-428 Performer Manifold, Ford FE 332-428
Performer 390 Intake Manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8s with medium- or low-rise cylinder heads. For Idle to 5500 RPM Street-Driven Performance Dual-Plane Low-Rise Intake w/180 deg. Firing Order Patented Runner Design Ensures Broad Torque Curve Excellent Throttle Response and Mid-Range Power 50-State Street Legal if Correct...
Edelbrock   Partnumber: 2105
From
€545.75
incl. vat
Performer Manifold, Chevrolet 90° 4.3L V6 Performer Manifold, Chevrolet 90° 4.3L V6
Designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Dual bolt pattern water neck fits both automotive and marine applications. Produced 18 more horsepower than an older manifold design on 4.3L marine engine. Will not accept stock automotive carbs or 262 T.B.I. unit. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer...
Edelbrock   Partnumber: 2111
€386.50
incl. vat
Performer Manifold, Chevrolet 90° V6 Vortec Performer Manifold, Chevrolet 90° V6 Vortec
Based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine swap market utilizing 1985 and later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with Vortec heads. With this manifold, rodders can take advantage of the higher flow available with the Vortec head design. Performer Vortec V6 #2114 has provisions for external water bypass and may...
Edelbrock   Partnumber: 2114
€421.00
incl. vat
Performer Manifold, Cadillac 472-500 V8 Performer Manifold, Cadillac 472-500 V8
This Performer is designed for 1968-76 Cadillac 472 and 500 cubic-inch engines. For either square or spread-bore carbs, #2115 is the first intake designed specifically for high-performance Cadillacs using standard heads. Like all Edelbrock Performers, this manifold increases torque and horsepower from idle to 5500 rpm. The broad power band is ideal for high-performance...
Edelbrock   Partnumber: 2115
€546.25
incl. vat
1 From 9
Viewed