Performer Manifold, AMC 304-360-401, 70-up

Performer Manifold, AMC 304-360-401, 70-up

€ 550,50 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Estimate Ship Date:
Tuesday 21 May

Productnr.: EDL-2131
Notes:

Edelbrock Part # 2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401... meer

Menu sluiten

Edelbrock 2131 - Performer Manifold, AMC 304-360-401, 70-up

Edelbrock Part # 2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power
Not for stock Motorcraft spread-bore carburetor

Car/Engine:	AMC / Jeep
Engine Notes:	290-304-360-401 cui
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	Without EGR
Flange:	Square Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Recommended intake gasket: Edelbrock # 7213 Fel-Pro MS96011
- Must use factory style metal valley tray
- Manifold height: A-4.20", B-5.50"
- Carburetor pad height: 4.85"
- Requires # 8008 or # 8024 Stud, nut and washer kit.
- Edelbrock Performer Series or Thunder Series carburetor, Square-Bore Adapter #2732 is required
- Carburetor recommendations: OEM 4-Brrl . Non-EGR square-bore Edelbrock AVS2 or Performer Series 500-650cfm.
- Camshaft Recommendations: Performer Plus #2132
- Port exit dimensions: 1.03" x 2.07"
- #2131 must use factory style metal valley tray.
- Edelbrock bracket #8034 required for 1979 and later vehicles.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Manifold will not accept factory Motorcraft spread-bore carburetors.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Performer Manifold, AMC 304-360-401, 70-up"

Van: Eddie K. Op: 5 sep. 2017

Good intake

My 360 has never run so smooth as it does with this intake.
The idle is much smoother and the hesitation in higher rpm i had with the original intake is gone.
Highly recommended!

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.