Prijzen incl. btw excl. verzendingskosten
In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays
- Productnr.: EDL-2186
Edelbrock Part # 2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across the block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise intake with 180-degree firing order
- Patented runner design ensures broad torque curve
- Excellent throttle response and mid-range power
|Car/Engine:||Chrysler Big Block|
|Engine Notes:||361-383-400 cui|
|Emission:||Without EGR, With EGR|
|Flange:||Square Bore, Spread Bore|
|Intake Style:||Dual Plane|
- Recommended intake gasket: Edelbrock # 7225
- Manifold height: A-3.65", B-4.35", measured to engine block
- Carburetor pad height: 4.00"
- Carburetor recommendations: OEM 4-Bbl, Edelbrock Thunder AVS or Performer Series 600-800cfm.Use # 1481 or # 1483 throttle/transmission lever kit.
- Camshaft Recommendations: Performer-Plus #2192
- Port exit dimensions: 1.14" x 2.12"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.