Performer Manifold, Chevrolet Small Block, 55-86, EGR

€ 418,50 *

Prijzen incl. btw excl. verzendingskosten

Verzending in circa 6-10 Werkdagen

Productnr.: EDL-3701
Notes:

Edelbrock Part # 3701 Performer EGR intake manifold is designed for street 1955-86 small-block... meer

Edelbrock 3701 - Performer Manifold, Chevrolet Small Block, 55-86, EGR

Edelbrock Part # 3701 Performer EGR intake manifold is designed for street 1955-86 small-block Chevys. This manifold accepts late-model choke, water neck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise Intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power
Accepts late-model choke, water neck and HEI ignition
Accepts A/C and alternator
Accepts exhaust heated chokes and accepts EGR

Car/Engine:	Chevrolet Small Block
Engine Notes:	262-400 cui - 1986 and earlier
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	With EGR
Flange:	Square Bore, Spread Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Manifold ht: A-3.50", B-4.60"
- Carburetor pad height: 4.05"
- Carburetor recommendations: OEM 4-Bbl, use choke rod # 9171. Edelbrock AVS2 or Performer Series 500-650 cfm. Use bracket # 8031 or # 8036 for 1972-78
- Camshaft Recommendations: #2102, #2103, #2208, #2209
- Port exit dimensions: 1.14" x 1.88"
- Recommended intake gasket: Edelbrock # 7201.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Edelbrock Choke plate # 8901 included
- See Edelbrock adapter # 8035 for clamp-on EGR valve.
- With Edelbrock carburetor # 1400 & # 3701, EGR spacer # 1476 is required.
- Edelbrock # 1476 is required with # 3701 on center bolt heads with 1986 & earlier bolt pattern.
- Edelbrock choke plate # 8901 included
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.