Torker II EFI Manifold, Pontiac 389-455

€ 573,50 *

Prijzen incl. btw excl. verzendingskosten

Verzending in circa 6-10 Werkdagen

Productnr.: EDL-50565
Notes:

Edelbrock Part # 50565 Torker II Pontiac EFI intake manifold is designed for 1965-79 street... meer

Menu sluiten

Edelbrock 50565 - Torker II EFI Manifold, Pontiac 389-455

Edelbrock Part # 50565 Torker II Pontiac EFI intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. It can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.

For 2500 to 6500 RPM high-performance engines
Can be use with Ram Air IV heads

Car/Engine:	Pontiac
Engine Notes:	1965-79 street 389-455 c.i.d. Pontiac V8s
Color/Finish:	Satin
RPM Range:	2500-6500
Serie:	Torker II

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Recommended intake gasket: Edelbrock # 7280
- Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block
- Throttle body pad height: 7.45"
- Throttle body recommendations: Edelbrock # 3878 4V 4150 style or # 3849 EFI elbow and # 3869 90mm throttle body.
- Port exit dimensions: 1.10" x 2.06"
- For 1968-71 use Edelbrock # 8015 throttle bracket
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Torker II EFI Manifold, Pontiac 389-455"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.