Performer RPM Manifold, Oldsmobile 330-403

Performer RPM Manifold, Oldsmobile 330-403

€ 607,75 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Ready to ship,
Estimated Ship Date: Monday 29th May

Productnr.: EDL-7111
Notes:

Edelbrock Part # 7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403... meer

Menu sluiten

Edelbrock 7111 - Performer RPM Manifold, Oldsmobile 330-403

Edelbrock Part # 7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile’s and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.

Best for the ultimate in street high-performance
Designed 1500 to 6500 RPM street-driven power
Dual-plane high-rise Intake with 180-degree firing order
Produces incredible top-end horsepower
Retains good throttle response and acceleration
Larger plenum and runners maximize other upgrades
Edelbrock total power package maximizes gains

Car/Engine:	Oldsmobile
Engine Notes:	307-330-350-403 cui
Color/Finish:	Satin
RPM Range:	1500-6500
Serie:	Performer RPM
Emission:	Without EGR
Flange:	Square Bore, Spread Bore
Intake Style:	Dual Plane
Usage:	Performance
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Recommended intake gasket: Fel-Pro # MS96027
- No provision for OEM choke
- Will not clear hood on 403 Olds, Firebird/TA. OEM carburetor requires conversion to electric/manual choke
- Manifold height: 2" taller than stock A-4.80", B-5.80
- Carburetor pad height: 5.30"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm.
- Camshaft Recommendations: Performer RPM #7112.
- Port exit dimensions: 1.22" x 1.86"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Performer RPM Manifold, Oldsmobile 330-403"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.