Timing Chain And Gear Set, Ford Small Block, Late 84-95, Performance

€ 98,50 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Ready to ship,
Estimated Ship Date: Friday 3th May

Productnr.: EDL-7811
Notes:

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... meer

Edelbrock 7811 - Timing Chain And Gear Set, Ford Small Block, Late 84-95, Performance

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stress proof steel crank gears
3 keyway setting points to ensure accurate timing
True bearing surface rolls with the sprockets
For engines with 2-piece fuel pump eccentric or EFI

Car/Engine:	Ford 260-289-302, Ford 351W
Engine Notes:	260-289-302 cui, 351W, True Roller Chain, From 1984-1995

Verdere links

Menu sluiten

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break
- On some late model engine blocks, it will be necessary to check clearance behind the cam sprocket (with the chain on the sprocket) and engine block at the 12 o