Zurück
Vor
471,25 €
inkl. MwSt. zzgl. Versandkosten
In Stock - Ready to ship,
Estimated Ship Date: Monday 13th May
- Artikel-Nr.: EDL-2111
- Notes:
Edelbrock Part # 2111 Performer 90 degree V6 intake manifold is designed for street and marine... mehr
Edelbrock 2111 - Performer Manifold, Chevrolet 90° 4.3L V6
Edelbrock Part # 2111 Performer 90 degree V6 intake manifold is designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Dual bolt pattern water neck fits both automotive and marine applications. Produced 18 more horsepower than an older manifold design on 4.3L marine engine. Will not accept stock automotive carburetors or 262 T.B.I. unit.
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise intake with 180-degree firing order
- Patented runner design ensures broad torque curve
- Excellent throttle response and mid-range power
- Produces at least 18 more horsepower
- Best matched with Edelbrock 500cfm carburetor
Car/Engine: | Chevrolet V6/L6 |
Engine Notes: | 200-229-262 cui - 1985-95 90° V6 |
Color/Finish: | Satin |
RPM Range: | Idle-5500 |
Serie: | Performer |
Emission: | Without EGR |
Flange: | Square Bore |
Intake Style: | Dual Plane |
Usage: | Street |
Carburator Setup: | Single-Carburator |
Weiterführende Links
Installation Notes
-
- Recommended intake gasket: Edelbrock # 7209 or Fel-Pro # 1202
- Manifold height: A-3.50", B-4.18"
- Carburetor pad height: 3.84"
- Carburetor recommendations: Edelbrock AVS2 Series or Performer Series 500cfm
- Port exit dimensions: 1.15" x 1.87"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Performer Manifold, Chevrolet 90° 4.3L V6"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Zuletzt angesehen