Edelbrock 2515 - Performer B-4B Manifold, Buick 400-455

699,75 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

  • EDL-2515
Edelbrock Part # 2515 Buick B-4B intake manifold is a resurrection of the popular B-4B manifold... mehr
Edelbrock 2515 - Performer B-4B Manifold, Buick 400-455

Edelbrock Part # 2515 Buick B-4B intake manifold is a resurrection of the popular B-4B manifold made in the late 1960s for street 400-430-455 c.i.d. Buick V8's. The only change to the original design is the addition of our proven Performer-style carb pad that accepts either square-bore or spread-bore carbs, making this manifold an excellent choice for both restoration and performance-minded Buick fans. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
  • Updated version of popular intake from 1960s
  • Accepts both OEM or Edelbrock-square Bore carburetors
Car/Engine: Buick / Rover
Engine Notes: 400-430-455 cui
Color/Finish: Satin
RPM Range: Idle-5500
Serie: Performer
Emission: Without EGR
Flange: Square Bore, Spread Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Weiterführende Links
Dokumentation... mehr
Installation Notes
    • Recommended intake gaskets: for 1967-76, Edelbrock # 7246 or Fel-Pro # MS96005; 1972-76, Fel-Pro # MS96014
    • Manifold height: A-3.80", B-4.75"
    • Carburetor pad height: 4.27"
    • Carburetor recommendations: OEM 4-Bbl. Edelbrock Avs2 or Performer Series 650-800 cfm
    • Port exit dimensions: 1.14" x 2.26"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Performer B-4B Manifold, Buick 400-455"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen