Performer TBI Manifold, Chevrolet Small Block

Performer TBI Manifold, Chevrolet Small Block

629,00 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Estimated Ship Date: Friday 3th May

Artikel-Nr.: EDL-3704
Notes:

Designed for 1987-95 305/350 c.i.d. 5.0/5.7L Chevy throttle body injected (TBI) engines. Accepts... mehr

Menü schließen

Edelbrock 3704 - Performer TBI Manifold, Chevrolet Small Block

Designed for 1987-95 305/350 c.i.d. 5.0/5.7L Chevy throttle body injected (TBI) engines. Accepts all OEM equipment and small-bore (1-11/16") throttle body injectors only. A computer chip is supplied free of charge with proof of purchase of manifold, cam and heads. Will not fit Caprice or Buick and Cadillac “B” bodies.

For idle to 5500 RPM street-driven performance
All factory connections used
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power
For OE and small-bore TBI injectors only
No chip changes/computer modifications required
for 5.7L power-package provides free computer chip

Car/Engine:	Chevrolet Small Block
Engine Notes:	For 1987-95 305/350 c.i.d. 5.0/5.7L
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Use stock Throttle Body Injection unit.
- Recommended intake gasket: GM # 10159409.
- Manifold height: A-3.70", B-5.10"; TBI pad height: 4.40", .250" taller than stock.
- Port exit dimensions: 1.13" x 1.87".
- Made in the USA
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.