Edelbrock 7566 - Performer RPM Air-Gap Manifold, Ford 429/460

691,25 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

  • EDL-7566
Edelbrock Part # 7566 RPM Air-Gap 460 intake manifold is designed for street and high... mehr
Edelbrock 7566 - Performer RPM Air-Gap Manifold, Ford 429/460

Edelbrock Part # 7566 RPM Air-Gap 460 intake manifold is designed for street and high performance 429/460+ c.i.d. Ford V8's with standard or Cobra Jet heads. The RPM Air-Gap 460 incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It also features a larger cross sectional area (3.3 square inches) than the Performer RPM 460 manifold #7166 intake manifold for even more power in high performance and large displacement engines. The carb mount flange accepts both square-bore and spread-bore carbs for Cobra Jet applications. Will not fit 1988 and later models. Note: Early Cobra Jets came with Quadrajets.

  • Based on performer RPM series with a unique air gap
  • Air gap cooler and denser mixture for more power
  • For 1500-6500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
Car/Engine: Ford Big Block
Engine Notes: 429/460 cui - 1987 and earlier
Color/Finish: Satin
RPM Range: 1500-6500
Serie: RPM Air-Gap
Emission: Without EGR
Flange: Square Bore, Spread Bore
Intake Style: Dual Plane
Usage: Performance
Carburator Setup: Single-Carburator
Weiterführende Links
Installation Notes
    • Recommended intake gasket: Edelbrock # 7223 or Fel-Pro # 1230/# 1231
    • Manifold height: A-4.81", B-6.15"
    • Carburetor pad height: 5.48"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 750-800 cfm. For automatic transmissions use # 1483 and # 1495 or # 1844.
    • Port exit dimensions: 1.76" x 2.06"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Performer RPM Air-Gap Manifold, Ford 429/460"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Zuletzt angesehen