Edelbrock 9267 - Heat Insulator, 4-Hole, Gasket, 0.125 Inch, For Dual-Quad

The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 is designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme underhood temperatures. These gaskets feature a four-hole design which will allow dual-quad Performer and RPM manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that the additional height of heat insulator gaskets will not cause interference. Remove air cleaner and all attachments to the carburetors such as fuel lines, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetors and set them, aside, then remove the old base gaskets and any additional plates. Remove the short carb studs and install the longer studs. Install the #9267 heat insulator gaskets directly against the manifold, then replace the carbs and all other connections.

• Set of 2 gaskets
• For Dual-Quad applications
• Helps prevents fuel percolation
• For extreme underhood temperatures
• Square-bore applications only
• Comes with extended carburetor studs