Rollin Thunder Kit, Chevrolet Small Block 57-86

€ 1.804,25 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Ready to ship,
Estimated Ship Date: Tuesday 30th April

Productnr.: EDL-22085
Notes: This camshaft works great when matched w/ Performer EPS intake manifold #2716, Performer carb #1407, and Performer E-Tec cylinder heads #60975; this combo produces 363 HP / 402 ft-lbs of torque.

Rollin Thunder Camshaft, Chevrolet SBC 1957-1986

Retro-Fit Hydraulic Roller Lifter Kit,...

Hardened Steel Pushrod Sets, Chevrolet Small...

1x	Rollin Thunder Camshaft, Chevrolet SBC 1957-1986	€ 625,00
1x	Retro-Fit Hydraulic Roller Lifter Kit,...	€ 1.128,75
1x	Hardened Steel Pushrod Sets, Chevrolet Small...	€ 240,50

Summe: € 1.994,25

Gegenüber dem Einzelkauf

€ 190,00

gespart!

Edelbrock Part # 22085 Rolling’ Thunder camshaft kit is designed for 1957-86 small-block Chevy... meer

Menu sluiten

Edelbrock 22085 - Rollin Thunder Kit, Chevrolet Small Block 57-86

Edelbrock Part # 22085 Rolling’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. These complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rolling’ Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rolling’ Thunder camshaft package may also be used with other components designed to operate in a similar RPM range.

Complete cam kit
Hydraulic roller lifters/pushrods dyno-matched
1957-1986 Chevy small block
Trouble-free installation

Car/Engine:	Chevrolet Small Block
Engine Notes:	265-350 V8 1957-1986
Camshaft Type:	Hydraulic Roller
Serie:	Rollin' Thunder
RPM Range:	1500-5500
Duration @ .050 Int/Exh:	212°/222°
Lift @ Valve Int/Exh:	.462"/.479"
Lobe Separation:	112°
Intake Center Line:	107°
Idle Vacuum @ 1000 RPM:	16"

Verdere links

Menu sluiten

Installation Notes

- This camshaft is designed to function with Valve Springs that have a closed pressure of 150 lbs, open pressure of 420 lbs and a lift of .550
- Compression ratio of at least 9.5:1
- Adjustable valvetrain required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Rollin Thunder Kit, Chevrolet Small Block 57-86"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.