Torker II Manifold, Chrysler RB 413/440

€ 463,75 *

Prijzen incl. btw excl. verzendingskosten

Verzending in circa 6-10 Werkdagen

Productnr.: EDL-5091
Notes:

Edelbrock Part # 5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d.... meer

Menu sluiten

Edelbrock 5091 - Torker II Manifold, Chrysler RB 413/440

Edelbrock Part # 5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads

2500 to 6500 RPM high performance street engines
Single-plane low-rise intake good for high RPMs
Ideal for applications with limited hood clearance
For top-end HP and adequate throttle response

Car/Engine:	Chrysler Big Block
Engine Notes:	413-440 cui
Color/Finish:	Satin
RPM Range:	2500-6500
Serie:	Torker II
Emission:	Without EGR
Flange:	Square Bore
Intake Style:	Single Plane
Usage:	Hi-Performance
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Recommended intake gasket: # 7225
- Manifold height: A-4.15", B-5.20", measured to engine block
- Carburetor pad height: 4.67"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 750-800cfm. Use # 1481 or # 1843 throttle/transmission lever kit.
- Port exit dimensions: 1.10" x 2.17"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Torker II Manifold, Chrysler RB 413/440"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.