Performer EPS Manifold, Chevrolet Small Block, 1996-up Vortec
incl. vat
Only 1 in stock
Estimated delivery time: 1-3 workdays
Notes
Tracked shipping across Europe
.svg?ts=1756209735)
All-in EU price, no import duties or fees
.svg?ts=1756209743)
Dutch Company & Warehouse
Customers rate us 9.5 out of 10
Edelbrock Part # 2716 Performer EPS Vortec intake manifold is now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is “tuned” for peak torque around 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood.
- Optimized to deliver superior performance
- Maximizes performance with Edelbrock carburetors
- Runners tuned to match-square bore carburetor
- Maximizes peak torque around 3500 RPM
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise Intake with 180-degree firing order
DETAILS
LINKS
No video avaliable.
Login
- Manifold height: A-3.87", B-5.28
- Carburetor pad height: 4.57"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm
- Camshaft Recommendations: #2102, #2103, #2208, #2209
- Port exit dimensions: 2.05" tall with slanted sidewalls.
- Recommended intake gasket: Edelbrock # 7235
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Will not fit under stock Corvette hood.
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Edelbrock Part # 2716 Performer EPS Vortec intake manifold is now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is “tuned” for peak torque around 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood.
- Optimized to deliver superior performance
- Maximizes performance with Edelbrock carburetors
- Runners tuned to match-square bore carburetor
- Maximizes peak torque around 3500 RPM
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise Intake with 180-degree firing order
DETAILS
LINKS
No video avaliable.
Login
- Manifold height: A-3.87", B-5.28
- Carburetor pad height: 4.57"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm
- Camshaft Recommendations: #2102, #2103, #2208, #2209
- Port exit dimensions: 2.05" tall with slanted sidewalls.
- Recommended intake gasket: Edelbrock # 7235
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Will not fit under stock Corvette hood.
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Accessory Items
Edelbrock
Part number: 8516
European
Holley Dealer
To Holley
Edelbrock
Embark on a thrilling journey of power and precision with Edelbrock, your trusted source for top-tier performance parts. We redefine driving with high-performance components like state-of-the-art carburetors, precision-engineered intake manifolds, and more—all crafted to elevate your vehicle's performance.
Optimize every horsepower with Edelbrock's blend of innovation, reliability, and craftsmanship. Our products meet the highest standards, satisfying automotive enthusiasts and professionals alike.
Edelbrock offers carburetors that breathe life into engines and intake manifolds designed for seamless integration, enhancing airflow and power. Whether you need camshafts or other components, Edelbrock delivers cutting-edge solutions that redefine performance.
Choose Edelbrock because we share your passion for powerful vehicles. Our performance parts unleash your engine's full potential, providing an unparalleled driving experience.
Maximize efficiency, elevate performance, and let your engine roar with Edelbrock Performance Parts. Experience the power and precision that turn drives into extraordinary journeys.