Intake Manifolds
1 From 14
No results were found for the filter!
Performer Manifold, Rover/Buick 215(3.5L) V8
Performer Manifold, Rover/Buick 215(3.5L) V8
(1 )
Edelbrock Part # 2198 Performer Rover intake manifold is designed for Rover 3500cc V8's (1968 and later). Manifold also fits 1961-63 Buick and Oldsmobile aluminum 215 c.i.d. V8's. Will not work with stock Stromberg carburetors. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle...
Edelbrock   Partnumber: 2198
€518.50
incl. vat
Intake Manifold Brass Hose Fitting for Chrysler Small Block
Intake Manifold Brass Hose Fitting for Chrysler Small Block
Edelbrock Part # 8078 Brass Hose Fitting For S/B Chrysler Intakes is a single barb coolant hose fitting. The fitting has a 1" single barb nipple and 3/4-14 NPT threads on the opposite end. The fitting is perfect for any coolant port bypass that needs this size of nipple. Fast and easy installation Connects to carburetor
Edelbrock   Partnumber: 8078
€22.75
incl. vat
Plated Intake Bolt Kit, Chevrolet Small Block 55-86
Plated Intake Bolt Kit, Chevrolet Small Block 55-86
(2 )
Edelbrock Part # 8504 Intake Bolt kit is designed specifically for 1986 & earlier small-block Chevy Edelbrock manifolds. This bolt kit features reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers. Hex heads For Edelbrock manifolds Cadmium finish steel bolt Cadmium finish hardened washer kit For manifold installation...
Edelbrock   Partnumber: 8504
€40.25
incl. vat

Variants available

RPM Air Gap Manifold, Ford 260/289/302
RPM Air Gap Manifold, Ford 260/289/302
Edelbrock Part # 7521 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8 applications. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap™ design features an open-air space that separates the runners from the hot engine oil resulting in a cooler, denser...
Edelbrock   Partnumber: 7521
From
€559.75
incl. vat

Variants available

RPM Air Gap Manifold, Ford 351C
RPM Air Gap Manifold, Ford 351C
Edelbrock Part # 7564 RPM Air-Gap 351C intake manifold design utilizes the same race-winning technology that’s been used on Edelbrock’s Victor Series competition intakes for many decades. Designed to improve performance on the street or racetrack, this manifold features an open space that separates the runners from the hot engine oil resulting in a cooler, denser charge. The...
Edelbrock   Partnumber: 7564
From
€657.25
incl. vat
Plated Intake Bolt Kit, Ford 351C, For Edelbrock #7564
Plated Intake Bolt Kit, Ford 351C, For Edelbrock #7564
Edelbrock Part # 8565 Intake Bolt kit is designed specifically for Ford #7564 Edelbrock manifold. This bolt kit features 12-point heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers. 12-point heads For Edelbrock manifolds Cadmium finish steel bolt Cadmium finish hardened washer kit For manifold installation Contains all bolts/washers
Edelbrock   Partnumber: 8565
€47.50
incl. vat
Flathead Slingshot Manifold, Ford Flathead 1938-48
Flathead Slingshot Manifold, Ford Flathead 1938-48
This is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless acorn nuts for mounting the two halves. Match with our block letter heads for a classic look. Will fit Ford and Mercury engines made from 1938 to 1948. Installation on 1949-1953 engines will require modification to the...
Edelbrock   Partnumber: 1103
€826.50
incl. vat
Flathead 4-barrel Manifold, Ford Flathead 49-53
Flathead 4-barrel Manifold, Ford Flathead 49-53
Edelbrock Part # 1107 Ford Flathead 4-barrel intake manifold for 1949-53 engines. This intake manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series AVS 500. This is a reproduction of the vintage Edelbrock #452 two-piece manifold with a new carb adapter flange. Reproduction of the vintage 452 two-piece manifold
Edelbrock   Partnumber: 1107
€698.00
incl. vat
Flathead Triple Deuce Manifold, Ford Flathead, 49-53
Flathead Triple Deuce Manifold, Ford Flathead, 49-53
Edelbrock Part # 1109 Triple Deuce intake manifold is a reproduction of the vintage Edelbrock manifold #SU 349 allow the use of three 2-barrel carburetors on 1949-1953 Ford Flathead engines. #1109 features front road draft and 1-3/8" diameter oil fill bosses and a raised fuel pump boss. The Edelbrock Triple Deuce #1109 intake manifold accepts, Stromberg 3-bolt (97 type),...
Edelbrock   Partnumber: 1109
€626.50
incl. vat
EGR Valve Adapter, For Chevrolet Manifold #3701, #3706
EGR Valve Adapter, For Chevrolet Manifold #3701, #3706
Edelbrock EGR Adapter # 1476 has made installing your new intake and carburetor easier when using Part # 3701 and # 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts. EGR adapter Clears OEM intake Includes gaskets and bolts For...
Edelbrock   Partnumber: 1476
€98.75
incl. vat

Variants available

Performer Manifold, Chevrolet Small Block, 55-86, for Corvette
Performer Manifold, Chevrolet Small Block, 55-86, for Corvette
Edelbrock Part # 2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles...
Edelbrock   Partnumber: 2101
From
€346.25
incl. vat

Variants available

Performer Manifold, Chevrolet Small Block, 87-95 cast Iron Heads
Performer Manifold, Chevrolet Small Block, 87-95 cast Iron Heads
Edelbrock Part # 2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes, 1987-1995. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Performer intake manifolds are ideal for passenger cars,...
Edelbrock   Partnumber: 2104
From
€428.00
incl. vat
1 From 14
Viewed