Performer Manifold, Ford 260/289/302

395,00 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Estimated Ship Date:Tuesday 7th May

Artikel-Nr.: EDL-2121
Notes:

Edelbrock Part # 2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d.... mehr

Menü schließen

Edelbrock 2121 - Performer Manifold, Ford 260/289/302

Edelbrock Part # 2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power

Car/Engine:	Ford 260-289-302
Color/Finish:	Black, Chrome Black, Chrome Plasma, Polished, Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	Without EGR
Flange:	Square Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Recommended intake gasket: Edelbrock # 7220
- Manifold height: A-3.50", B-4.75"
- Carburetor pad height: 4.12"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650cfm, for automatic transmissions use # 1483 & # 1490 or # 1844.
- Edelbrock carburetors will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000
- Camshaft Recommendations: Performer-Plus #2122.
- Port exit dimensions: 1.09" x 1.84"
- Due to the design of Performer manifolds, the throttle and kick-down bracket on some vehicles may require modification to fit. When using Edelbrock carburetors, use # 1490 or # 1845 throttle plate kit.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.