Timing Chain And Gear Set, Ford 351C, 351M-400, 1962-82

107,25 €

In Stock - Ready to ship,
Estimated Ship Date: Monday 29th May

Artikel-Nr.: EDL-7821
Notes:

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... mehr

Edelbrock 7821 - Timing Chain And Gear Set, Ford 351C, 351M-400, 1962-82

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stress proof steel crank gears
3 Keyway setting points to ensure accurate timing
True bearing surface rolls with the sprockets

Car/Engine:	Ford 351C, Ford 351M/400
Engine Notes:	351M-400 cui, 351C

Weiterführende Links

Menü schließen

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break