Zurück
Vor
102,50 €
inkl. MwSt. zzgl. Versandkosten
In Stock - Ready to ship,
Estimated Ship Date: Monday 29th May
- Artikel-Nr.: EDL-7808
- Notes:
Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... mehr
Edelbrock 7808 - Timing Chain And Gear Set, Ford FE 352-428 1963-76
Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.
- Solid bushing chain resists stretching
- For use with stock or Edelbrock camshafts
- Stress proof steel crank gears
- 3 Keyway setting points to ensure accurate timing
- True bearing surface rolls with the sprockets
Car/Engine: | Ford FE |
Engine Notes: | 332-352-360-390-406-410-427-428 cui |
Weiterführende Links
Installation Notes
-
- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break
- On some late-model engine blocks, it will be necessary to check clearance behind the cam sprocket (with the chain on the sprocket) and engine block at the 12 o
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Timing Chain And Gear Set, Ford FE 352-428 1963-76"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Variants available
Variants available
Variants available
Variants available
Variants available
Zuletzt angesehen