Torker II Manifold, Ford 351W

496,50 €

inkl. MwSt. zzgl. Versandkosten

Special Order. Estimated Shipping in 3-4 weeks.

Brand Estimated Time of Arrival Information

Artikel-Nr.: EDL-5081

Edelbrock Part # 5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor... mehr

Menü schließen

Edelbrock 5081 - Torker II Manifold, Ford 351W

Edelbrock Part # 5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit “Boss 351” Cleveland. Manifold not equipped with EGR.

2500 to 6500 RPM high-performance street engines
Single-plane low-rise intake good for high RPMs
Ideal for applications with limited hood clearance
For top-end HP and adequate throttle response

Car/Engine:	Ford 351W
Color/Finish:	Satin
RPM Range:	2500-6500
Serie:	Torker II
Emission:	Without EGR
Flange:	Square Bore
Intake Style:	Single Plane
Usage:	Hi-Performance
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Use 12-bolt intake gasket set Edelbrock # 7220 recommended
- For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set.
- 1" open carburetor spacer, Edelbrock #8710 is recommended when hood clearance permits.
- Manifold height: A-3.55", B-4.75", same as stock
- Carburetor pad height: 4.15"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm. For automatic transmissions use # 1483 and # 1491 or # 1844
- Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000
- Port exit dimensions: 1.02" x 1.82"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Bewertungen lesen, schreiben und diskutieren... mehr

Menü schließen

Kundenbewertungen für "Torker II Manifold, Ford 351W"

Bewertung schreiben

Bewertungen werden nach Überprüfung freigeschaltet.