inkl. MwSt. zzgl. Versandkosten
Special Order. if available at Manufacture: Estimated Shipping in 3-4 weeks.
- Artikel-Nr.: EDL-5409
- Notes:
Edelbrock Part # 5409 Performer RPM Dual-Quad intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines with factory large port or with our Performer RPM W-series heads #60809 or #60819. The manifold deliver performance with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept our dual-quad fuel lines, throttle linkage, and air cleaners. Includes Oil Fill Tube (not installed) and matching push-in Breather. Oil Fill Tube and Breather are also available separately as #4803. Carb center-to-center measurement is 6-7/16".
- For factory large port heads
- Performance improvements in the 1500-6500rpm range
- Accept our Dual-Quad accessories
- Including oil fill tube and matching push-In breather
- Grommet-style PCV provision in back of manifold
- 1958-1965 Chevrolet 348-409 with big Block
Car/Engine: | Chevrolet W-Series |
Engine Notes: | 348-409 cui - Large Ports |
Color/Finish: | Satin |
RPM Range: | 1500-6500 |
Serie: | Performer RPM |
Emission: | Without EGR |
Flange: | Square Bore |
Intake Style: | Dual Plane |
Usage: | Performance |
Carburator Setup: | Dual-Quad |
-
- Recommended intake gasket: Edelbrock # 7240 or Fel-Pro MS9788B
- Manifold height: A-4.03", B-5.21"
- Carburetor pad height: 4.62"
- Carburetor recommendations: Edelbrock AVS2 Series # 1903 and # 1904 500 cfm.
- Port exit dimensions: 2.39" x 1.15"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Variants available
Variants available
Variants available
Variants available
Variants available