Prices incl. VAT plus shipping costs*
In Stock - Ready to ship,
Estimated Ship Date: Monday 29th May
- Order number: EDL-85312
- Notes:
Edelbrock E-Series Cylinder Head Bolt Kit #85312 is designed for use with Edelbrock Performer Cylinder Heads #60129/#60139 and Performer RPM Cylinder Heads #60109/#60119 used on pre-1970 AMC engines with 7/16-inch diameter head bolts. This kit contains all of the necessary parts to replace the factory head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock “E” stamped into the head."
- Small hex head provides extra socket clearance
- Durable black oxide finsh
- Washers included
- Rated at 190000 psi
- Lenghts: (10) 2.250 in, (4) 3.060 in, (14) 3.750 in
| Car/Engine: | AMC / Jeep |
| Serie: | E-Series |
| Engine Notes: | For pre-1970 engines |
-
- The Edelbrock #85312 is made specifically for Pre-1970 AMC
- Installation is the same as for original equipment cylinder heads.
- Consult the service manual for specific procedures, if necessary.
- Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation.
- Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.
- Torque cylinder head bolts in three steps following the factory tightening sequence