Edelbrock part # 2665 Performer 351-4V intake manifold is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32". Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise intake with 180-degree firing order
- Patented runner design ensures broad torque curve
- Excellent throttle response and mid-range power
|Intake Style:||Dual Plane|
- Recommended intake gasket: Fel-Pro # 1228
- Manifold height: A-3.50", B-4.30
- Carburetor pad height: 3.90"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm, for automatic transmissions use # 1483 & # 1493 or # 1844
- Port exit dimensions: # 2665 - 1.37" x 2.15"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Everithings ok but only one
Everithings ok but only one thing: I haven't read in your advice that the gaskets are not included !
So macht einkaufen richtig Spaß. alles super vielen dank.