Edelbrock 9265 - Heat Insulator, Open, Gasket, 0.32 Inch

Heat Insulator, Open, Gasket, 0.32 Inch
€38.50 *

Prices incl. VAT plus shipping costs*

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

  • EDL-9265
The Edelbrock Square-bore Heat Insulator Gasket #9265 is designed to prevent percolation on... more
Edelbrock 9265 - Heat Insulator, Open, Gasket, 0.32 Inch

The Edelbrock Square-bore Heat Insulator Gasket #9265 is designed to prevent percolation on Edelbrock Performer Series carburetors exposed to extreme underhood temperatures. This gasket features an open center that will allow open plenum Torker and Victor style manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that the additional height of the heat insulator gasket will not cause interference. Remove air cleaner and all attachments to the carburetor such as fuel line, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetor and set it aside, then remove the old base gasket and any additional plates, such as Edelbrock square-bore adapter #2732. Remove the short carb studs and install the longer studs. Install the #9265 heat insulator gasket directly against the manifold, then replace the carb and all other connections. Note that gasket #9265 is rigid enough to replace square-bore adapter plate #2732, if required.

  • For single-plane applications
  • Helps prevents fuel percolation
  • For extreme underhood temperatures
  • Square-bore applications only
  • Comes with extended carburetor studs
Spacer Type: Heat-insulator
Spacer Style: Open
Thickness: 0.32"
Material: Rubber Gasket
Flange: Square Bore
Related links
Documentation... more
Read, write and discuss reviews... more
Customer review for "Heat Insulator, Open, Gasket, 0.32 Inch"
8 Aug 2018

Square bore heat insukator

Excellent!

Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Variants available

Variants available

Variants available

Variants available

Variants available

Breather & Grommet Breather & Grommet
From
€19.50
incl. vat

Variants available

Variants available

NEW

Variants available

Variants available

Variants available

Variants available

Variants available

TBI AN Fitting, GM TBI AN Fitting, GM
From
€10.75
incl. vat

Variants available

Variants available

Variants available

Variants available

Variants available

Variants available

Viewed