Edelbrock Part # 2116 Performer intake manifold is based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree...

Edelbrock Part # 2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake...

Edelbrock Part # 2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer...

Designed for street 400-430-455 c.i.d. Buick V8's. Manifold not equipped with EGR. Will fit cold air induction hoods. Will not fit Buick 350. ** Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm. Installation Notes: Recommended intake gaskets: for 1967-71, Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014. #2146 accepts...

Edelbrock Part # 2151 Performer Oldsmobile 455 intake manifold is designed for street 400-425-455 c.i.d. applications. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks,...

Edelbrock Part # 2156 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for...

Edelbrock Part # 2161 Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. Will not fit under the hood of Corvette without hood modifications. Will not fit "tall block" V8's. May be used with OEM or aftermarket carbs. Will fit 1965-90 oval port heads. Edelbrock's Patented Dual-plane, low-rise...

Edelbrock Part # 2166 Performer 460 intake manifold is designed for street 429/460 c.i.d. Ford V8's. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent...

Edelbrock Part # 2171 Performer 351M/400M intake manifold is designed for 400 c.i.d. Ford V8's produced from 1971 to 1982 with 2V Cleveland heads and 351M V8's produced from 1975 to 1982. Will not fit 1974 and earlier 351C V8's. Valley width measures 8-17/32". Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide...

Edelbrock Part # 2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response...

Edelbrock Part # 2181 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8's. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm...

Edelbrock Part # 2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across the block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm....