Edelbrock 2121 - Performer Manifold, Ford 260/289/302

€315.25 *

Prices incl. VAT plus shipping costs

In Stock - Ready to ship,
Delivery time appr. 1-3 workdays

color:

  • EDL-2121
Edelbrock Part # 2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d.... more
Edelbrock 2121 - Performer Manifold, Ford 260/289/302

Edelbrock Part # 2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. 

  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
Car/Engine: Ford 260-289-302
Color/Finish: Satin, Black, Endurashine, Polished
RPM Range: Idle-5500
Serie: Performer
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Related links
Documentation... more
Installation Notes
    • Recommended intake gasket: Edelbrock # 7220
    • Manifold height: A-3.50", B-4.75"
    • Carburetor pad height: 4.12"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650cfm, for automatic transmissions use # 1483 & # 1490 or # 1844.
    • Edelbrock carburetors will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000
    • Camshaft Recommendations: Performer-Plus #2122.
    • Port exit dimensions: 1.09" x 1.84"
    • Due to the design of Performer manifolds, the throttle and kick-down bracket on some vehicles may require modification to fit. When using Edelbrock carburetors, use # 1490 or # 1845 throttle plate kit.
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Read, write and discuss reviews... more
Customer review for "Performer Manifold, Ford 260/289/302"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed